Français     English    
Ad Visits counter
  Visits today: 2 
  Visits yesterday: 40 
  Visits Week 134 
  Visits Month 998 
  Visits Year 31978 
  Visits Total 397877 






Our Equipments
Envirolyte Manual Unit EL-2000
Envirolyte EL-2000: meeting customer's demands

  • The Envirolyte Group launched Envirolyte EL-2000 in December, 2008 after intensive consultations with our customers and partners and their continued requests for a Envirolyte unit with higher output capacity.
  • The Envirolyte EL-2000 unit has been designed for production of activated solution - Neutral Anolyte.
  • Easy operating procedures give the added benefit to rapid delivery of safe and fast acting disinfectant-Anolyte
  • The Envirolyte EL-2000 unit has been developed to produce Neutral Anolyte (~2000L per day) on the spot and on demand when disinfecting, sterilisation and water purification are required.
  • The strength of Anolyte in terms of active chlorine concentration can be adjusted by current setting.
  The key features and general specifications of Envirolyte EL-2000

I   Features of Envirolyte EL-2000

  • A self-cleaning cycle has been programmed into the machine, which ensures easy maintenance and maximum productivity.

  • The unique design of the diaphragmatic cell ensures that electrolyte used in the processing of solutions has maximum contact with the electrodes and therefore ensures the most effective use of energy and minimum salt consumption.

  • There is a minimal hydraulic resistance against liquids flowing through the cell chambers and therefore an optimum flow rate is achieved.

  • The electrodes are specifically designed to endure high electrochemical loading as are the membranes, separate the solutions.

  • The enclosure is made of non-corrosive materials. Tubes and connectors are of EPDM/PVDF plastics and are highly resistant against aggressive solutions.

  • A simple on/off switch with a power indicator starts and stops the unit manually.

  • No moveable or replaceable parts.

  Activated solution produced by Envirolyte EL-2000 units

~200L per hour ANOLYTE

NEUTRAL ANOLYTE is used wherever pH is important (corrosion) and where possible evaporation of active chlorine cannot be avoided. Neutral Anolyte is very effective against all kinds of bacteria and viruses and is mostly used to disinfect swimming pools, drinking or other water. Besides Neutral Anolyte is widely used to disinfect and sterilize various objects (floors, walls, tools. foodstuff etc.)


Amps active chlorine mg/l pH ORP mV (redox-potential)
~55 ~500 7,5 - 8,5 >800





Tous les droits réservés www.envirolyte-tn.com Sfax Tunisie @2012
Produced by: Wonder Solutions